FloatETA estimates how long this float actually takes from live discharge at USGS 13052200 (Teton River ab South Leigh Creek nr Driggs), not a guidebook average. At a typical 500 cfs, a raft drifts about 2.6 mph here. Higher flow speeds you up; skinny water slows you down. Kayaks run faster than the current, tubes slower. Optional fishing adds 35 minutes per mile.
The Teton River (Driggs) listing covers 13 river miles across 2 access-to-access stretches (Class I). Times in the table are typical raft hours at that reference flow. Open the live calculator for today's CFS, sunset take-out, water temperature, and rain/UV at the put-in.
See today's Teton River (Driggs) float time
Float stretches on the Teton River (Driggs)
| Put-in → take-out | Miles | Difficulty | Typical raft time | Notes |
|---|---|---|---|---|
| Bates Bridge → Rainey Bridge | 7 mi | Class I | ~2 hr 42 min | Classic Teton Valley drift. Brushy banks and irrigation — scout new wood every spring. |
| Rainey Bridge → Cache Bridge | 6 mi | Class I | ~2 hr 18 min | Gets skinny late. Drift boats more than tubes. Respect private land at the fences. |
How we time this river
Speed scales with discharge using hydraulic geometry v ∝ Q0.34, calibrated to this gauge. That is why a 1,000 cfs afternoon is a different day than 3,000 cfs runoff. Always scout, wear a PFD, and check Idaho Fish and Game for closures. Gauge page: USGS 13052200.
Common questions
How long does it take to float Bates Bridge to Rainey Bridge on the Teton River (Driggs)?
About 2 hr 42 min in a raft at a typical 500 cfs. Kayaks run a bit faster; tubes run slower. Stopping to fish adds about 35 minutes per mile. Classic Teton Valley drift. Brushy banks and irrigation — scout new wood every spring.
How long does it take to float Rainey Bridge to Cache Bridge on the Teton River (Driggs)?
About 2 hr 18 min in a raft at a typical 500 cfs. Kayaks run a bit faster; tubes run slower. Stopping to fish adds about 35 minutes per mile. Gets skinny late. Drift boats more than tubes. Respect private land at the fences.
What USGS gauge is used for Teton River (Driggs) float times?
FloatETA uses USGS gauge 13052200 (Teton River ab South Leigh Creek nr Driggs) for live discharge. Speed is scaled from a reference 500 cfs drift of about 2.6 mph.
Is the Teton River (Driggs) a good tube float?
Tubes lag the current (we use a 0.72× speed multiplier). On Class I–II stretches tubes can work at moderate flows; skip high water and always wear a PFD.